All counting scales can be calibrated using the internal software, and a certificated test weight.
To achieve optimum accuracy from the scale, it should be adjusted in locality where it is used, because the latitude and altitude affect the calibration and the strain gauge cell could go out of adjustment during the transportation.OIML weight classes:
Class E1
- Weights intended to ensure traceability between national mass standards (with values derived from the International Prototype of the kilogram) and weights of class E2 and lower.
- Class E1 weights or weight sets shall be accompanied by a calibration certificate
Class E2
- Weights intended for use in the verification or calibration of class F1 weights and for use with weighing instruments of special accuracy class I.
- Class E2 weights or weight sets shall be accompanied by a calibration certificate.
- They may be used as class E1 weights if they comply with the requirements for surface roughness, magnetic susceptibility and magnetization for class E1 weights, and if their calibration certificate gives the appropriate data.
Class F1
- Weights intended for use in the verification or calibration of class F2 weights and for use with weighing instruments of special accuracy class I and high accuracy class II.
Class F2
- Weights intended for use in the verification or calibration of class M1 and possibly class M2 weights.
- Also intended for use in important commercial transactions (e.g. precious metals and stones) on weighing instruments of high accuracy class II.
Class M1
- Weights intended for use in the verification or calibration of class M2 weights, and for use with weighing instruments of medium accuracy class III.
Class M2
- Weights intended for use in the verification or calibration of class M3 weights and for use in general commercial transactions and with weighing instruments of medium accuracy class III.
Class M3
- Weights intended for use with weighing instruments of medium accuracy class III and ordinary accuracy class IIII.
Delivered without weight.
Code number | Weight (kg) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 04498 | 50 | 2500 | M1 | Login required |
Rectangular weights, cast iron lacquered.
Code number | Weight (kg) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 04479 | 5 | 250 | M1 | Login required | |
630 04480 | 10 | 500 | M1 | Login required | |
630 04481 | 20 | 1000 | M1 | Login required | |
630 04482 | 50 | 2500 | M1 | Login required |
Rectangular weights, cast iron lacquered.
Code number | Weight (kg) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 04405 | 5 | 2500 | M3 | Login required | |
630 04406 | 10 | 5000 | M3 | Login required | |
630 04407 | 20 | 10000 | M3 | Login required | |
630 04408 | 50 | 25000 | M3 | Login required |
Rectangular weights, stainless steel.
Code number | Weight (kg) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 04483 | 5 | 250 | M1 | Login required | |
630 04484 | 10 | 500 | M1 | Login required | |
630 04485 | 20 | 1000 | M1 | Login required | |
630 04486 | 50 | 2500 | M1 | Login required |
Single weight, cylindrical, finely turned stainless steel.
Code number | Weight (g) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 03300 | 1 | 1 | Class M1 | Login required | |
630 03301 | 2 | 1,2 | Class M1 | Login required | |
630 03302 | 5 | 1,6 | Class M1 | Login required | |
630 03303 | 10 | 2 | Class M1 | Login required | |
630 03304 | 20 | 2,5 | Class M1 | Login required | |
630 03305 | 50 | 3 | Class M1 | Login required | |
630 03306 | 100 | 5 | Class M1 | Login required | |
630 03307 | 200 | 10 | Class M1 | Login required | |
630 03308 | 500 | 25 | Class M1 | Login required | |
630 03309 | 1000 | 50 | Class M1 | Login required | |
630 03310 | 2000 | 100 | Class M1 | Login required | |
630 03311 | 5000 | 250 | Class M1 | Login required | |
630 03312 | 10000 | 500 | Class M1 | Login required |
Single weights, cylindrical, polished stainless steel.
Code number | Weight (g) | Tolerance +- (mg) | OIML class | Stock | Price ( ExVAT ) |
---|---|---|---|---|---|
630 04365 | 1 | 0,1 | F1 | Login required | |
630 04366 | 2 | 0,12 | F1 | Login required | |
630 04367 | 5 | 0,16 | F1 | Login required | |
630 04368 | 10 | 0,2 | F1 | Login required | |
630 04369 | 20 | 0,25 | F1 | Login required | |
630 04370 | 50 | 0,3 | F1 | Login required | |
630 04371 | 100 | 0,5 | F1 | Login required | |
630 04372 | 200 | 1 | F1 | Login required | |
630 04373 | 500 | 2,5 | F1 | Login required | |
630 04374 | 1000 | 5 | F1 | Login required | |
630 04375 | 2000 | 10 | F1 | Login required | |
630 04376 | 5000 | 25 | F1 | Login required | |
630 04377 | 10000 | 50 | F1 | Login required | |
630 04378 | 20000 | 100 | F1 | Login required | |
630 04379 | 50000 | 250 | F1 | Login required |