ITECO - County EVO SMD kit

County EVO SMD kit

---

COUNTY EVO - COMPONENT COUNTER 100-240V 50/60 HZ WITH ACCUMULATOR :

Manual Counter for taped components.
County EVO is a microcomputer based instrument which counts axial, radial and SMD (with adaptor in option) components.

• Counting in both directions (left or right).
• Divider from 1 to 19 (and multiplier 2,3,4 for 0402, 0201 and 01005 components).
• Totalizer mode counting.
• Preset mode counting (with an audible alarm when the desired component number is reached).
• Calibration test and self diagnostic procedure.
• Last counting value and condition memory.
• Models "plus" with rechargeable battery, Barcode reader input, output for Printer/PC, Watch, Datalogger with 500 counting records.
• Maximum counting value: 899999 counts.
• Minimum lead diameter: 0.4mm.
• Axial component bandolier width: 55 - 110mm.
• Radial component bandolier width: max 18mm.
• Maximum component diameter : 14mm.
• Display: 4 digits 13mm height.
• Calibration certificate included at first delivery.

---

COUNTY SMD COUNTY ADAPTOR :

The County adaptor for counting taped SMD components is an optional accessory for the County Component Counter.

• The maximum tape height is 56mm and the maximum number of hole for component is min 0.5 - max 19.
• Mounting the adaptor does not require any tools and it is locked in place by snap action.
• Component counting is achieved by counting the punched holes on the SMD tapes.
• Rotating SMD supports and SMD bandolier handle are optional items.

---

REEL HOLDER HANDLE FOR SMD REEL SUPPORT :

Handle for support counting of components in SMD coils, Compatible with County EVO and County-S EVO

---

COUNTY - ALUMINIUM EMPTY REEL :

Aluminium empty reel to speed up the counting operations and subsequent rewinding of the SMD components.

• Diameter: 360mm

---

WORKTOP WITH 2 PINS FOR REEL FOR COUNTY :

The worktop includes two easy insertions pins with adjustable clutch.

---

BARCODE WITH CABLE FOR COUNTY EVO :

It's small, lightweight and ergonomic design.

• Coiled cable included, a wider than usual scan angle provides the ability to read a longer bar code from a shorter distance.
• IP42 protection.
• The barcode is connected and powered via a single cable, without the hassle of two separate cables.

---

ADHESIVE LABEL PRINTER, 1 LABELS ROLL INCLUDED :

Label Printer
Direct thermal printer based on robustness and reliability, with 110 / 230Vac feeder and signal cable included.

It is able to print on labels with a maximum width of 104mm.

For EVO counters, printing is optimized for 57x51mm labels.