Easy use:
- It's plug and play, just connect it to the main supply without any settings and it will be stable at less than 5%RH (5%RH is guaranteed but the cabinets easily reach 2%RH).
- The dehumidifier units are always active and not controlled by any sensor.
- This avoid dangerous problems due to malfunction or drift of hygrometers.
*Easy calibration
- Inside every cabinet there is a portable hygrometer (DryLogger 9265.302) visible through the glass of the upper door.
- You can return it for calibration anytime without problems: the cabinet still works to the best.
- The portable instrument DryLogger can measure RH & Temperature values in several points inside the cabinet, and can record H/T and transfer the data to PC for graphing and analyzing.
- Made for very low humidity measurement can be used also for applications outside the cabinets.
*Modular design:
- The dehumidifier modules are easy extractable with only a screwdriver.
- This allow easy reparation and grant the long life of the cabinet, over 20 years, as long as the metal structure last.
- This is our green policy.
- Smart magnetic handles with key lock at every door.
- The front of the cabinet is flat.
- 2 years warranty.
*Data analysis
- With the portable instrument DryLogger and the software LogManager supplied with every cabinet you can calculate the time intervals and percentage that exceed the 10%RH or 5%RH which leads to the estimation of the MSD floor life ("Floor Life" is the allowable time period after removal from a moisture barrier bag, dry storage or dry bake and before the solder process reflow).
Technical specifications
- Humidity range: <5% RH guaranteed, typical 2%RH
- Colour: light grey, RAL 7035
- Power supply: 230Vac
- Structure: 1.2mm thick carbon steel with antistatic paint
- Door: 520x755mm, magnetic hermetically sealed, with key lock
- Grounding wire: 2m long
- ESD paint: 10^3 - 10^9 Ohm
DRYLOGGER II HUMIDITY TEMPERATURE LOGGER :
Precision Temperature/Humidity meter.
- It is also a datalogger used to collect environmental data of humidity and temperature and to transfer them to a Windows PC.
- The LogManager software, working on Windows PC, used for downloading, displaying, analyzing and reporting your collected humidity and temperature data is included.
- It is possible to set an alarm that become active when, after a certain period of time, humidity or temperature are above a predetermined maximum threshold.
- When the alarm is activated the red LED under the display flashes.
- Humidity: 1 to 95%RH.
- Resolution: 0.1%RH.
- Accuracy: ±2%RH (at 25°C, 10%RH~90%RH), ±3%RH (at 25°C, 1%RH~10%RH, 90%RH~95%RH).
- Temperature: -20°C to +60°C.
- Resolution: 0.1°C.
- Accuracy: ±1°C.
- Humidity Alarm: from 1 to 95%.
- Temperature Alarm: from 0 to 60°C.
- Alarm activation delay: from 1 to 99 minutes.
- Memory: 64Kbyte (21600 couples of RH & T).
- Sampling rates: can be set at 1, 5, 10, 15, 30 seconds and 1, 5, 10, 15, 30 minutes.
- LCD Display: 48 x 11 mm.
- Interface: RS232 e USB.
