IDEAL-TEK - SMART TWEEZER ST-5S

Cliquez pour agrandir

Pour illustration uniquement

Marque :	IDEAL-TEK
N° de code :	819 90006
Supplier :	ST-5S

Smart Tweezers ST-5S is a handheld LCR meter of a new concept.

It provides a perfect solution for testing and identification of Surface Mount Devices as well as
troubleshooting of complex electronic systems.
Its unique mechanical and electronic design combines a pair of precise gold-plated tweezers
and a digital LCR meter in compact, lightweight, battery powered instrument.
The probe is able to measure resistance, capacitance, inductance with high accuracy and
automatic component recognition.

Wide spectrum of additionnal functions:

Smart Tweezers LCR meter allows you to test various component types, including secondary components of Dissipation Factor (D), Quality Factor (Q). This handheld also includes other functions that result in a more detailed component analysis.
The built-in Equivalent Series Resistance (ESR) mode helps you better understand the inherent resistance behavior typically found in capacitors across selected frequencies.
In its DIODE mode Smart TweezersTM tests diode polarity and indicates if it is short.
Smart Tweezers has a continuity detector. Variable beeper sounds for resistance reading below set thresholds. Additionally, this function helps to locate shorted conductors (e.g. on a PCB).
Variable test signal output from 0.5 to 1.0 Vrms allows to improve test precision in different situation e.g. for in-circuit measurement and loose leaded ceramic capacitors.
Visible and audible tolerance mode allows to perform component sorting.
Math null function allows to store a pre-measured offset and improve measurement precision.

Physical Specifications

Operating Temperature: 0 °C to +50 °C
Battery Type: 3.7V LiPO rechargeable 180mAH
Size: 15.0 x 1.8 x 1.5 cm (5.9 x 0.7 x 0.6 in)
Weight: 29 grams (0.06lb)

Technical Specification

Measured Parameters: C+R (ESR), L, C, R, Z
Measuring Frequencies: 100Hz, 120Hz, 1kHz, 10kHz
Test frequency accuracy: 50 PPm (0.005%)
Test signal level: 0.5 / 1.0 +- 5% Vrms Sine Wave
Source impedance: 62.5ohm / 1kohm / 16kohm +- 1%

Measurement Ranges

Resistance R: 0.05 to 9.9 MOhm
Capacitance C: 0.5 pF to 4999 uF
Inductance L: 0.5 uH to 999 mH
Quality factor Q: 0.001 to 1000
Dissipation factor D: 0.001 to 1000

Stock et prix : Login requis

Smart Tweezers ST-5S is a handheld LCR meter of a new concept.

Wide spectrum of additionnal functions:

Smart Tweezers LCR meter allows you to test various component types, including secondary components of Dissipation Factor (D), Quality Factor (Q). This handheld also includes other functions that result in a more detailed component analysis.
The built-in Equivalent Series Resistance (ESR) mode helps you better understand the inherent resistance behavior typically found in capacitors across selected frequencies.
In its DIODE mode Smart TweezersTM tests diode polarity and indicates if it is short.
Smart Tweezers has a continuity detector. Variable beeper sounds for resistance reading below set thresholds. Additionally, this function helps to locate shorted conductors (e.g. on a PCB).
Variable test signal output from 0.5 to 1.0 Vrms allows to improve test precision in different situation e.g. for in-circuit measurement and loose leaded ceramic capacitors.
Visible and audible tolerance mode allows to perform component sorting.
Math null function allows to store a pre-measured offset and improve measurement precision.

Physical Specifications

Operating Temperature: 0 °C to +50 °C
Battery Type: 3.7V LiPO rechargeable 180mAH
Size: 15.0 x 1.8 x 1.5 cm (5.9 x 0.7 x 0.6 in)
Weight: 29 grams (0.06lb)

Technical Specification

Measured Parameters: C+R (ESR), L, C, R, Z
Measuring Frequencies: 100Hz, 120Hz, 1kHz, 10kHz
Test frequency accuracy: 50 PPm (0.005%)
Test signal level: 0.5 / 1.0 +- 5% Vrms Sine Wave
Source impedance: 62.5ohm / 1kohm / 16kohm +- 1%

Measurement Ranges

Resistance R: 0.05 to 9.9 MOhm
Capacitance C: 0.5 pF to 4999 uF
Inductance L: 0.5 uH to 999 mH
Quality factor Q: 0.001 to 1000
Dissipation factor D: 0.001 to 1000