Filters

WELLER - Smart micro desoldering tweezers set WXMTS

Click to zoom

For illustration purpose only

ESD_safe
Brand :	WELLER
EAN code :	4003019446933
Code number :	810 13212
Supplier :	T0051321299
Model :	WXMTS set
Soldering tip width (mm) :	3
Desoldering :
Minimum temperature (°C) :	100
Maximum temperature (°C) :	450
Heat-up time (50°C - 350°C) (s) :	5
Power (W) :	2x 40
Voltage (V) :	12
tag :	MIL-SPEC WXsmart Tweezers 2023 launch

WXMTS + RTWMS 030 K + WSR 210.

Kit contains:

Micro desoldering tweezers WXMTS, 12V
Tip RTWMS 030 K X bent - 3,0 x 1,0mm, 2x 40 W
Safety rest WSR 210

WXMTS MICRO TWEEZER HANDPIECE PACKED :

Micro Soldering and Desoldering Tweezers Handpiece. 2x 40W 12V
Delivered without tip

Fast - Precise - Smart

De-Soldering Tweezers is the perfect solution for fast and precise SMD rework of chip components and small / medium SOP from PCB assemblies (supports usage under the microscope).
It has improved ergonomic with the new soft grip design.
The short-distance tip-to-grip as well as the parallel sliding block ensures greater accuracy and comfort when working.
The pre-adjusted pairwise tip design increases productivity as they are immediately ready to use.

High-performance / High-productivity

Extremely short heat-up time: 5 sec.
Excellent reaction time.

Highest precision

Maximum precision during the soldering process with short tip-to-grip distance and optimized tip design.
Precise positioning ensured with unique parallel sliding block guide.
No alignment necessary after tip change with pairwise design.
Adjustability functions with Allen key: 1.5mm possible if needed (+-80° rotation angle adjustment + vertical length adjustment of +-1.2mm)
Desoldering Tweezers Tips allow Automatic Tip-Offset.

Unique 2-in-1 smart desoldering tweezers, 80W, 12V

Supports Pico and Micro Tweezers Tips for usage under the microscope. (Save one Tweezers Tool)

Fastest tweezers tip change

Active Tip Cartridge System allows for easy exchange of soldering tip even with a hot desoldering tweezers, all without needing an extra tool or further adjustment.

Visual process control through RGB signal function

Easy Tool Identification. Color customization enabled. (Choose between 12 colors)

Integrated parameter memory

Standby temperature and automatic switch-off time can easily be stored in soldering tweezers.
Parameters only need to be stored once, the desoldering tweezers can use them with any WXsmart station

Ergonomics

Improved comfort and safe handling with new ergonomic soft grips.

Military Standard

According to Military Standard, Mil-Spec compliant and fully compliant to IPC industry standards (IPC - TM-650 2.5.33 Measurement of Electrical Overstress from Soldering Hand Tools)

TIP KNIFE BENT RTWMS 030 K X 3x1mm :

High-performance / High-productivity

Extremely short heat-up time: 5 sec.
Quick response time.

Highest precision

Maximum precision during the soldering process with short tip-to-grip distance and optimized tip design.
Precise positioning ensured with unique parallel sliding block guide.
No alignment necessary after tip change with pairwise design.
Adjustability functions with Allen key: 1.5mm possible if needed (+-80° rotation angle adjustment + vertical length adjustment of +-1.2mm)

Fastest tweezers tip change

Active Tip Cartridge System allows for easy exchange of soldering tip even with a hot desoldering tweezers, all without needing an extra tool or further adjustment.

Ergonomics

Improved comfort and safe handling with new ergonomic soft grips.

Unique intelligent tweezers tips

Only with WXsmart
Smart function only in combination with WXsmart desoldering tweezers WXMTS, smart function is not active when used with desoldering tweezers WTMT.

Automatic Smart Tweezers Tip Identification.
Full Traceability with Tweezers Tip ID Number and Integrated Data Storage.
Accurate Data Results with Tip-Offset Function.
Full Process Control with Tip Lock Function.

Military standard

According to Military Standard, Mil-Spec compliant and fully compliant to IPC industry standards (IPC - TM-650 2.5.33 Measurement of Electrical Overstress from Soldering Hand Tools)

SAFETY REST WSR 210 FOR WXMTS, WXUTS :

Safety rest for WXMTS and WXUTS tweezers.

Safety Rests Join Together
With the removal of the blue side plates, two or more safety rests can be bolted together

2-in-1 WSR Safety Rest
The soldering iron holder can be rotated through 180°. Users can choose between wet and dry tip cleaning.

Stock and price : Login required

WXMTS + RTWMS 030 K + WSR 210.

Kit contains:

Micro desoldering tweezers WXMTS, 12V
Tip RTWMS 030 K X bent - 3,0 x 1,0mm, 2x 40 W
Safety rest WSR 210

WXMTS MICRO TWEEZER HANDPIECE PACKED :

Micro Soldering and Desoldering Tweezers Handpiece. 2x 40W 12V
Delivered without tip

Fast - Precise - Smart

High-performance / High-productivity

Extremely short heat-up time: 5 sec.
Excellent reaction time.

Highest precision

Maximum precision during the soldering process with short tip-to-grip distance and optimized tip design.
Precise positioning ensured with unique parallel sliding block guide.
No alignment necessary after tip change with pairwise design.
Adjustability functions with Allen key: 1.5mm possible if needed (+-80° rotation angle adjustment + vertical length adjustment of +-1.2mm)
Desoldering Tweezers Tips allow Automatic Tip-Offset.

Unique 2-in-1 smart desoldering tweezers, 80W, 12V

Supports Pico and Micro Tweezers Tips for usage under the microscope. (Save one Tweezers Tool)

Fastest tweezers tip change

Active Tip Cartridge System allows for easy exchange of soldering tip even with a hot desoldering tweezers, all without needing an extra tool or further adjustment.

Visual process control through RGB signal function

Easy Tool Identification. Color customization enabled. (Choose between 12 colors)

Integrated parameter memory

Standby temperature and automatic switch-off time can easily be stored in soldering tweezers.
Parameters only need to be stored once, the desoldering tweezers can use them with any WXsmart station

Ergonomics

Improved comfort and safe handling with new ergonomic soft grips.

Military Standard

According to Military Standard, Mil-Spec compliant and fully compliant to IPC industry standards (IPC - TM-650 2.5.33 Measurement of Electrical Overstress from Soldering Hand Tools)

TIP KNIFE BENT RTWMS 030 K X 3x1mm :

High-performance / High-productivity

Extremely short heat-up time: 5 sec.
Quick response time.

Highest precision

Maximum precision during the soldering process with short tip-to-grip distance and optimized tip design.
Precise positioning ensured with unique parallel sliding block guide.
No alignment necessary after tip change with pairwise design.
Adjustability functions with Allen key: 1.5mm possible if needed (+-80° rotation angle adjustment + vertical length adjustment of +-1.2mm)

Fastest tweezers tip change

Active Tip Cartridge System allows for easy exchange of soldering tip even with a hot desoldering tweezers, all without needing an extra tool or further adjustment.

Ergonomics

Improved comfort and safe handling with new ergonomic soft grips.

Unique intelligent tweezers tips

Only with WXsmart
Smart function only in combination with WXsmart desoldering tweezers WXMTS, smart function is not active when used with desoldering tweezers WTMT.

Automatic Smart Tweezers Tip Identification.
Full Traceability with Tweezers Tip ID Number and Integrated Data Storage.
Accurate Data Results with Tip-Offset Function.
Full Process Control with Tip Lock Function.

Military standard

According to Military Standard, Mil-Spec compliant and fully compliant to IPC industry standards (IPC - TM-650 2.5.33 Measurement of Electrical Overstress from Soldering Hand Tools)

SAFETY REST WSR 210 FOR WXMTS, WXUTS :

Safety rest for WXMTS and WXUTS tweezers.

Safety Rests Join Together
With the removal of the blue side plates, two or more safety rests can be bolted together

2-in-1 WSR Safety Rest
The soldering iron holder can be rotated through 180°. Users can choose between wet and dry tip cleaning.

Consist of

	Code number	Supplier	Description
1x	810 13209	T0051320999	WXMTS MICRO TWEEZER HANDPIECE PACKED
1x	810 01160	T0050116099	TIP KNIFE BENT RTWMS 030 K X 3x1mm
1x	810 15184	T0051518499	SAFETY REST WSR 210 FOR WXMTS, WXUTS

Code number	Supplier	Model	Dimensions (mm)	Channel count	Minimum temperature (°C)	Maximum temperature (°C)	Power (W)	Voltage (V)	Weight (kg)	Stock	Price ( ExVAT )
810 34516	T0053451699	WXsmart	175 x 154 x 144	2	100	450	300	230	4,78	Login required

Code number	Supplier	Model	Stock	Price ( ExVAT )
810 15184	T0051518499	WSR 210	Login required

High-performance / High-productivity

Code number	Supplier	Model	Shape	Width (mm)	Thickness (mm)	Power (W)	Packing	Stock	Price ( ExVAT )
810 01162	T0050116299	RTWMS 013 S	Chisel	1,3	0,4	2x 40	x 1	Login required

WELLER : Tweezer tip RTWMS chisel bent

High-performance / High-productivity

Code number	Supplier	Model	Shape	Width (mm)	Thickness (mm)	Bent	Power (W)	Packing	Stock	Price ( ExVAT )
810 01159	T0050115999	RTWMS 007 S X	Chisel bent	0,7	0,4		2x 40	x 1	Login required

WELLER : Tweezer tip RTWMS chisel - Non Wettable

NON WETTABLE

Code number	Supplier	Model	Shape	Width (mm)	Thickness (mm)	Power (W)	Packing	Chromed	Stock	Price ( ExVAT )
810 01167	T0050116799	RTWMS 008 S NW	Chisel	0,8	0,4	2x 40	x 1		Login required

WELLER : Tweezer tip RTWMS conical bent

High-performance / High-productivity

Code number	Supplier	Model	Shape	ø (mm)	Bent	Power (W)	Packing	Stock	Price ( ExVAT )
810 01158	T0050115899	RTWMS 004 C X	Conical bent	0,4		2x 40	x 1	Login required

WELLER : Tweezer tip RTWMS conical bent - Non wettable

NON WETTABLE

Code number	Supplier	Model	Shape	ø (mm)	Bent	Power (W)	Packing	Chromed	Stock	Price ( ExVAT )
810 01166	T0050116699	RTWMS 001 C NW X	Conical bent	0,1		2x 40	x 1		Login required

WELLER : Tweezer tip RTWMS knife straight

High-performance / High-productivity

Code number	Supplier	Model	Shape	Width (mm)	Thickness (mm)	Power (W)	Packing	Stock
810 01163	T0050116399	RTWMS 030 K	Knife	3	1	2x 40	x 1	Login required
810 01165	T0050116599	RTWMS 060 K	Knife	6	1	2x 40	x 1	Login required
810 01164	T0050116499	RTWMS 100 K	Knife	10	1	2x 40	x 1	Login required

WELLER : Tweezer tip RTWMS knife bent

High-performance / High-productivity

Code number	Supplier		Model	Shape	Width (mm)	Thickness (mm)	Bent	Power (W)	Packing	Stock	Price ( ExVAT )
810 01160	T0050116099		RTWMS 030 K X	Knife bent	3	1		2x 40	x 1	Login required
810 01161	T0050116199		RTWMS 060 K X	Knife bent	6	1		2x 40	x 1	Login required

Smart Pico tweezer tips RTWPS

WELLER : Tweezer tip RTWPS chisel bent

High-performance / High-productivity

Code number	Supplier		Model	Shape	Width (mm)	Thickness (mm)	Bent	Power (W)	Packing	Stock	Price ( ExVAT )
810 01156	T0050115699		RTWPS 002 S X	Chisel bent	0,2	0,1		2x 40	x 1	Login required
810 01157	T0050115799		RTWPS 002 S X HM	Chisel bent	0,2	0,1		2x 40	x 1	Login required

WELLER : Tweezer tip RTWPS conical bent

High-performance / High-productivity

Code number	Supplier		Model	Shape	ø (mm)	Bent	Power (W)	Packing	Stock	Price ( ExVAT )
810 01154	T0050115499		RTWPS 001 C MS	Conical bent	0,1		2x 40	x 1	Login required
810 01155	T0050115599		RTWPS 001 C X HM	Conical bent	0,1		2x 40	x 1	Login required

Soldering stations

WELLER : Soldering station WXsmart Pico/Micro and tweezers

Optimized rework system for all Pico (Nano) and Micro tasks in the electronics, medical, automotive and aerospace industry.

Code number	Supplier	Stock	Price ( ExVAT )
810 34576	T0053457699	Login required

Sponges

WELLER : Sponges double layer

Cleaning sponges - pack of 5.

Code number	Supplier	Description	Packing	Stock	Price ( ExVAT )
810 22420	T0052242099	Sponge double layer x5	x 5	Login required

WELLER : Sponges

Cleaning sponges - pack of 5.

Code number	Supplier	Description	Packing	Stock	Price ( ExVAT )
810 22419	T0052241999	Sponge x5	x 5	Login required

WELLER : Brass metal wool for WDC2

Code number	Supplier	Description	Packing	Stock	Price ( ExVAT )
810 13841	T0051384199	Brass metal wool for WDC2 x2	x 2	Login required

WELLER : Metal wool for WDC2

Code number	Supplier	Description	Packing	Stock	Price ( ExVAT )
810 13825	T0051382599	Metal wool for WDC2 x2	x 2	Login required