Dry Cabinet 1384L, 4 doors.
Easy use
It's plug and play, just connect it to the main supply without any settings and it will be stable at less than 5%RH (5%RH is guaranteed but the cabinets easily reach 2%RH).
The dehumidifier units are always active and not controlled by any sensor. This avoid dangerous problems due to malfunction or drift of hygrometers.
Easy calibration
Inside every cabinet there is a portable hygrometer (DryLogger 758 92653 02) visible through the glass of the upper door. You can return it for calibration anytime without problems: the cabinet
still works to the best.
- The portable instrument DryLogger can measure RH & Temperature values in several points inside the cabinet, and can record H/T and transfer the data to PC for graphing and analyzing. Made for very low humidity measurement can be used also for applications outside the cabinets.
Modular design
The dehumidifier modules are easy extractable with only a screwdriver. This allow easy reparation and grant the long life of the cabinet, over 20 years, as long as the metal structure last. This is our green policy.
- Smart magnetic handles with key lock at every door. The front of the cabinet is flat.
- 2 years warranty.
Data analysis
With the portable instrument DryLogger and the software LogManager supplied with every cabinet you can calculate the time intervals and percentage that exceed the 10%RH or 5%RH which leads to the estimation of the MSD floor life ("Floor Life" is the allowable time period after removal from a moisture barrier bag, dry storage or dry bake and before the solder process reflow).
Adjustable shelves
Technical specifications
- Humidity range: <5% RH guaranteed, typical 2%RH
- Colour: light grey, RAL 7035
- Power supply: 230Vac
- Structure: 1.2mm thick carbon steel with antistatic paint
- Door: 520x755mm, magnetic hermetically sealed, with key lock
- Grounding wire: 2m long
- ESD paint: 10e3 - 10e9 ohms
DRYLOGGER II HUMIDITY TEMPERATURE LOGGER :
Precision Temperature/Humidity meter.
- It is also a datalogger used to collect environmental data of humidity and temperature and to transfer them to a Windows PC.
- The LogManager software, working on Windows PC, used for downloading, displaying, analyzing and reporting your collected humidity and temperature data is included.
- It is possible to set an alarm that become active when, after a certain period of time, humidity or temperature are above a predetermined maximum threshold.
- When the alarm is activated the red LED under the display flashes.
- Humidity: 1 to 95%RH.
- Resolution: 0.1%RH.
- Accuracy: ±2%RH (at 25°C, 10%RH~90%RH), ±3%RH (at 25°C, 1%RH~10%RH, 90%RH~95%RH).
- Temperature: -20°C to +60°C.
- Resolution: 0.1°C.
- Accuracy: ±1°C.
- Humidity Alarm: from 1 to 95%.
- Temperature Alarm: from 0 to 60°C.
- Alarm activation delay: from 1 to 99 minutes.
- Memory: 64Kbyte (21600 couples of RH & T).
- Sampling rates: can be set at 1, 5, 10, 15, 30 seconds and 1, 5, 10, 15, 30 minutes.
- LCD Display: 48 x 11 mm.
- Interface: RS232 e USB.
