CAB - Cards Separator Maestro 4S 450 / 600, Alu Set-Up

The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress.
Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that can damage sensitive components near the groove. Even a second traverse of the groove accompanied by an adjustment of the blade distance substantially reduces the tensile and compressive stresses. This significantly improves the quality of the populated PCBs.

The most important features :

• The blade distance is entered on the operating panel and its adjustment is motor-powered.
• Up to nine programs can be stored.
• The materials used for PCBs are FR4 and aluminumThe continuously adjustable separation length is set with limit switches.
• The accumulated cutting performance is displayed for the purpose of scheduling preventive maintenance of the blade.

For separating aluminum with the MAESTRO 4S we recommend using the FR4 circular blade with special blade settings.
Various aluminum alloys are used in the manufacture of PCBs. We recommend submitting sample PCBs with the order in order to optimize the cutting geometry and for the correct adjustment of the circular blades.

Separation type :

• Component side - circular blade
• Solder side - linear blade

Operation :

• Optimized motor driven

Separation speed :

• 300/500 mm/s switchable

Material :

• FR4, Aluminium

Height of components :

• Solder and component sides up to 34mm

Continuously adjustable separation length :

• For 4s 450 - Up to 450 mm, For 4s 600 - Up to 600 mm

Width of supporting blade :

• 200 mm

Start

• Traverse to starting position

Program

• 9

Separation steps

• 1 - 5

Blade distance

• 0.9 mm up to 0.05 mm

Key switch button

• Release program selection

Cutting performance display

• up to 99 km

DEL

• Reset step count

Power switch

• ON / OFF

Foot switch

• START Operation

Safety switch

• Emergency stop

Voltage

• 100 - 240 VAC 50/60 Hz

Emission sound pressure level

• LpA < 70 dB (A)

Temperature/ Operation

• + 5 - 40°C / 10 - 85%

Humidity Storage

• + 0 - 60°C / 20 - 80%

not condensing Transport

• - 25 - 60°C / 20 - 80%

Weight

• 4s 450 - 38 kg
• 4s 600 - 46 kg

Height x Depth

• 434 x 425 mm

Width

• 4s 450 - 702 mm
• 4s 600 - 852 mm

Approvals

• CE, FCC class A

Adjustment of the Upper Guide on MAESTRO 4S

Changing the Lower Blade on MAESTRO 4S

Changing the Upper Blade on MAESTRO 4S