KOLVER - SCREWDRIVER PLUTO10P/N pistol grip

The Telescopic Spindle (axial compensator) is used in multi spindle applications to balance the

Like EDU2AE + Run time, Torque Value, Additional signals, Serial port, Serial print, Integrated screw counter, Optional screwdriver connector on back panel.

All screwdrivers work in combination with a control unit acting as an AC to DC transformer and torque controller.

High grade chrome-vanadium steel, through hardened.

Tough viscous bits for hexagon socket screws for universal use.

Hexagon 4 mm

Trimmer for easy and safe setting of spindle resistances and potentiometers (Poti).

Tough bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Tough bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Tough bits for hexagonal socket screws, for universal use. The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Hexagonal ball end MagicRing® 1/4" E6,3.

Material: High grade chrome-vanadium steel, through hardened.

- Made in the USA - Quality and Availability

High quality Wera bit for Phillips screws.

High quality bits, optimised for Asian PH screws.

Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

High quality bits for Phillips screws, optimised for Asian PH screws. Similar to DIN ISO 8764-1-PH. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Phillips 4 mm

Phillips 1/4" E6,3

High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design.

High quality bits for Phillips screws. Extra-hard design. Profiled version. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits with HIOS 4 mm drive. Optimised for Japanese PH screws. Hard design.

BiTorsion bits for Phillips screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for drywall screws. Reduced shaft diameter for low-lying screw connections. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for drywall screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction. The diamond coating of the bits ensures a secure fit in the screw, reduces the contact pressure required and lowers the risk of slipping. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8.

High quality bits with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Come with rough ribs (anti cam-out feature, ACR®) to prevent any slipping out of the screw head. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws. Extra-hard titanium nitride (TiN) coating for withstanding permanent loads such as e.g. in industrial applications. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws. Tough viscous for universal use. Thread drive M 4.

High quality bits for Phillips screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard design, ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for Phillips screws. Tough viscous for universal use. Thread drive M 5.

High quality bits for Phillips screws. Tough-absorbing for universal use. Threaded connector #10-32 UNF.

Premium bits for Phillips screws with a torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Premium bits for Phillips screws. Torque peaks are cushioned by the torsion shape. Premature wear is avoided and the service life of the bit is increased. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

High quality bits for Phillips screws. Screws can be applied without any damage to the surface. The Torsion design means that torque peaks can be absorbed. This prevents premature wear and enhances the service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Phillips, 3 pcs. in box, 1/4"

BiTorsion bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

BiTorsion bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous for universal use; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Material: High grade chrome-vanadium steel, through hardened.

Optimum performance, long life. For T or Y shaped screw.

BiTorsion bits for Pozidriv screws with Torsion zone where kinetic energy is diverted. This greatly extends the product service life. Tough viscous for universal use; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Pozidriv* screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction and suitable for drywall screws. Pozidriv*. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.